Help!高手門

[admin]

這裡是否高手能解決這問題?
謝謝!!
============
Generate a Revit family (.rfa format )
Requires: Regards to the Front doors. As part of putting together our rack elevations for construction drawings, we would like the ability to remove the door from visibility in elevation view but keep the door shown in the 3D and plan views. This would allow us the ability to show equipment within the enclosures in elevation view while still maintaining the ability to accurately space-plan in plan view.

[admin]

這只是視圖性質/可見性 圖型取代,以及視圖樣板的應用,詳見F1

[admin]

Thank you for your sincerely help!

What do you mean "F1"?

[admin]

所有的軟體內建的說明.使用手冊都可以直接按下鍵盤上的F1鍵開啟

[admin]

Thanks! understand.
Is it possible to make non-visible in elevation view but visible in plan view?

[admin]

When you make an family
You can set visable or non-visable for any model with view

1.select model ~ ex:door and glass
2.disable visable @ elevation
3.load to project & test

[admin]

It works. Thank you very much.

Another question is how to put the object at a specific height above the floor in 3D view. I see some of the default object could be placed at a specific height.

Anyway, thank you again!

[admin]

Some family template have "Default Height" ,like Window,Door

Or you can add an reference face,dimension it,and setting parameters
Then,You can set any value for object elevation

You can find more about family tutorials in autodesk site...
http://usa.autodesk.com/adsk/servlet/in ... ID=9243097